Share:
LD-828 Ball Valve - Socket End / Threaded End
Size: 1/2” ~ 3”
Size: 1/2” ~ 3”
• Industrial grade, maintenance free sealed unit and compact design.
• EPDM or genuine Viton O-ring seals.
• Full 235 PSI pressure tested at 73°F(22°C).
• Excellent flow characteristics.
• CTS standard also available.
• Resistant to many inorganic chemicals.
• Severe shock loads are absorbed by the valve body, not the ball and seat, minimizing the chance of un- even wear and leakage.
A ball valve is a valve that opens by turning a handle/Gear attached to a ball inside the valve. The ball has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. The handle position lets you “see” the valve’s position.
Ball valves are durable and usually work to achieve perfect shutoff even after years of disuse. They are there- fore an excellent choice for shutoff applications
• EPDM or genuine Viton O-ring seals.
• Full 235 PSI pressure tested at 73°F(22°C).
• Excellent flow characteristics.
• CTS standard also available.
• Resistant to many inorganic chemicals.
• Severe shock loads are absorbed by the valve body, not the ball and seat, minimizing the chance of un- even wear and leakage.
A ball valve is a valve that opens by turning a handle/Gear attached to a ball inside the valve. The ball has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. The handle position lets you “see” the valve’s position.
Ball valves are durable and usually work to achieve perfect shutoff even after years of disuse. They are there- fore an excellent choice for shutoff applications
Inquiry - PVC BALL VALVE ( MADE IN TAIWAN )